Category: Length

The best method to measure shoes is to put them down carefully on a dull surface, such as a floor or a table. However, measuring the shoe will only work for brands whose footwear you already have.

Accurate measurement of your feet, as well as the shoes, is a must if you’re purchasing shoes online. Shoes that are too tight or too loose are uncomfortable as well as unfashionable.

Place your shoes down carefully on a flat surface, such as a table or floor to get the best measuring result. Yet, measuring a pre-existing shoe will work only for brands whose footwear you already own. Or else, you will have to measure your own feet and apply the measurements to the sizing guide given by the brand or a website.

Below you will walk through a detailed guide on taking measurements for shoes. Keep on reading on to find out more.

Convert Feet to Meters here

Steps To Measure Shoes

Measure Shoe Length – Put your shoes on a flat, solid surface, such as a table or floor. Then position the measuring tape on the tip of your shoe and pull it to the heel of the shoe, or until where the shoe ends.

Measure Shoe Width – With the shoes placed on a flat surface, put one tip of the measuring tape on one side of the widest part of the shoe [on the front] and measure it until the other side. You should measure across the widest shoe vamp, but it is crucial to exclude the sole.

Measure Shoe Height – First of all, put the shoes on a solid, flat surface such as a table. Then, position the measuring tape vertical to the heel of the shoe and drag it to the edge of the shoe opening. This will give you the shoe height. In this instance, make certain to include the shoe sole.

Measure Shoe Top-line – In this case, you should put the tip of your measuring tape inside the opening of the shoes and circle it inside. This will provide you with the shoe’s top-line measurement.

Measure Sole Thickness – Placing your shoes on a solid, flat surface, measure the sole thickness by putting the tip of the measuring tape on the bottom edge of the sole and measuring until the top edge.

Measure Heel Thickness/Heel Height – In order to measure shoes with heels, position the tip of the measuring tape on the base edge of the heel and measure until the part where the heel is connected to the main body of the shoe.

Convert Cubic Yards to Cubic Feet here

Steps To Measure Your Body

Foot Length Measurement – The most important part of taking measurements for shoes is to measure your foot length since most shoe sizes depend mainly on the measurement of the foot length only. Regarding this, grab a piece of paper and place your foot on it. In case, if your foot is too big, attach another sheet of paper to it, with the ends of both slightly overlapping. Next, position your foot onto the paper and, using a pen or a marker, gently trace around the foot, with the pen vertical to your foot. Make certain that you are wearing the sock that you will be wearing with the shoe you buy. Put all your weight onto the paper, as it will help you to get the most precise measurement.

The Width Measurement – Grab the measuring tape and gently wrap it around the widest part of your foot, which is typically around the bunion joint. Put a mark on the point where the two ends overlap. Make certain that you place all your weight on the foot while making this measurement.

Convert Gallons to Cubic Feet

Tips For Making Measurements

– Make sure that all the measurements are made with the shoes positioned on a smooth surface, like a floor or a table, and all creases smoothened out.

– While measuring, do not hold the tape measure too tightly or loose. It must wrap around your body well.

– Make certain that all the measurements are as precise as possible.

– Consult an international sizing chart as each country or region has its own rules of sizing. Brands vary in sizing as well, and many brands are known for having garments that run a size larger. Therefore, it is necessary to match your measurements with their sizing guide.

– Always refer to the sizing guide noted by a brand/store.

– Take the measurements after a full day of walking as it tends to grow the size of the foot.

– Try to be as precise as possible when taking shoe sizes, and measure to the nearest inch.

– Because our feet tend to be asymmetrical, measuring both feet, is recommended.

Check out our free converter here

The majority of the world’s cities seem like mazes of concrete and glass. Everywhere you look, you find tall skyscrapers, roads swarming with cars, and a whole lot of noise associated with city living. Not very attractive if you are someone who appreciates being somewhere more peaceful, with lots of green space.

Some cities possess large, well-known oases of green space, in which individuals can enjoy wildlife’s sights and sounds, have a picnic, play a sport, or simply take a soothing stroll. These kinds of green spaces are known as urban parks. Some of them cover hundreds, and thousands, of hectares. Some of them can be found just on the outskirts of the city limits, and others can be accessed from within the city. Here you will find out about the 9 biggest urban parks in the world.

If you want to convert 1 liter to oz click here

#1 – Chugach State Park

The largest urban park in the world is Chugach State Park. It spans more than 200,000 hectares. Actually, it is almost ten times larger than the world’s second-largest Park (Table Mountain National Park). Chugach State Park can be found in Anchorage, Alaska. The name “Chugach” is a tribal one for the local Indigenous people. The park itself contains various geographical elements, including lakes, rivers, tall mountains, and foothills. It also has hiking trails that are very popular with tourists. Further outdoor activities in the park include biking, riding ATVs, rafting, fishing, and kayaking. The park users can find campgrounds and cabins for rent.

#2 – Table Mountain National Park

The Table Mountain National Park, which is the world’s second-biggest park is located in Cape Town, South Africa. The park measures 22,100 hectares and is named after the well-known, flat Table Mountain, which has a flat peak that makes it look like a tabletop. To get to the top of the mountain, you should take a cable car. In the park, you can find 1,470 floral species and nearly 2,200 various species of plants the majority of which are endemic to the region. At Table Mountain National Park, another interesting sight to see is the penguins, who enjoy flocking in a spot of the park called The Boulders.

#3 – Margalla Hills National Park

Margalla Hills National Park is the third-biggest urban park in the world. It consists of 17,386 hectares and is located in the city of Islamabad, the capital city of Pakistan. Established in 1980, the park includes the Margalla Hills, Rawal Lake, and the Shakarparian complex of Sports and Culture. The Margalla Hills National Park boasts several species of mammals, birds, and reptiles, and it is Islamabad wildlife sanctuary’s extension. The national park also includes various hiking trails popular among locals and tourists. With regard to landscape, the Margalla Hills are the rugged foothills of the vast Himalayan Mountain range and include many steep slopes and valleys.

Convert j to btu here

#4 – Pedra Branca State Park

Spanning 12,394 hectares in one of Brazil’s largest cities, Rio de Janeiro, Pedra Branca State Park is an urban park. To be more accurate, it is an urban forest. The Pedra Branca State Park protects one of the most threatened biomes of both Brazil and the world, half of the Atlantic Forest remnant of Rio de Janeiro. The park contains almost 500 different species of mammals, birds, reptiles, amphibians, and fish, some of which are endangered, and more than 900 species of plants. The park is located at an altitude of 3,360 feet [1,024 m], where you will find the highest point in Rio de Janeiro, the Pico da Pedra Branca.

#5 – McDowell Sonoran Preserve

This park is located in the United State of Arizona, in the city of Scottsdale. McDowell Sonoran Preserve includes a wide variety of multi-use trails, which can be traversed by foot, bike, or horse. It encompasses 12,300 hectares of Sonoran Desert habitat. The website of the City of Scottsdale cautions people who visit the park to look out for rattlesnakes, which appear from hiding in the spring and are a protected species considered vital to the ecosystem of the park.

Convert various units of measure here

#6 – Sanjay Gandhi National Park

The Sanjay Gandhi National Park, named after a prominent Indian politician, is located in Mumbai, India, and covers a space of 10,384 hectares. The park encompasses a vast area of forest, with more than 1,300 species of trees. It also contains various animal species, including 35 species of mammals, 274 species of birds, and 170 species of butterflies. Park visitors can enjoy different activities, like going on lion and tiger safaris, cycling, boating, and visiting the ancient Kanheri Caves carved into the rock approximately 2,000 years ago.

#7 – Franklin Mountains State Park

Lying within the city limits of El Paso, Texas, the Franklin Mountains State Park is located in the small Franklin Mountains range. It was established in 1979 to preserve the Chihuahuan Desert landscapes and spans 9,812 hectares. Park activities include camping, rock climbing, hiking, and mountain biking. You will have the opportunity to ride a mechanized gondola to an observation point at an altitude of 5,632 feet [1,717 m] if you visit Franklin Mountains, State Park.

Convert cubic yards to cubic feet here

#8 – Bayou Sauvage National Wildlife Refuge

The Bayou Sauvage National Wildlife Refuge is situated in New Orleans, Louisiana, and encompasses an area of 9,210 hectares. It was created to protect the last remaining marsh areas in the region. Bayou Sauvage National Wildlife Refuge is home to several different natural habitats, including bottomland hardwoods, canals, marshes, lagoons, borrow pits, and natural bayous. There are approximately 340 species of birds that can be found in the refuge. Another typical sight is the American alligator. This refuge is one of 9 that are all part of the Southeast Louisiana Wildlife Refuges Complex.

#9 – Bukhansan National Park

Bukhansan National Park is located in Seoul, the capital of South Korea. The word “Bukhansan,” word-for-word means “mountains north of the Han River.” The park has an area of 7,992 hectares, and it has been selected by the Guinness Book of World Records as the “Most Visited National Park per Unit Area.” Yearly it is visited by an estimated 5 million people. The park is also home to approximately 3,100 animal and plant species. It is very popular with hikers and contains forested areas, granite peaks, gorges, and Buddhist temples.

Calculate 180 days from today here

The United States is a wide-reaching, massive country with a variety of landscapes, ecosystems, and terrain. Across them all, many large rivers cut through the land, whether across deep river valleys, flowing through swampy wetlands, or carving through mountainous terrain. In the United States, some of the largest rivers in the world can be found. The country’s sheer size means it has a lot of very long rivers. We made a list of the eight longest rivers in the US in order of length.

1. Missouri River

This river is best known for being the longest river in the US. Its total measure is 3,768 km and it is actually the Mississippi River’s tributary. Missouri river drains around 1/6 of the entire continent of North America, and many smaller rivers and tributaries flow into it. Headwaters of the river flow from the Rocky Mountains of Montana, near the continental divide, which is one of the highest points on the continent. From that point, the waters flow through North Dakota, South Dakota, near Iowa and Nebraska border, through Missouri, where they get to the mouth of the river in St. Charles. The river’s national significance cannot be downplayed, as it is the longest and one of the largest rivers in the country. For many years it has served as a source of food via fish and also game (which live among the river banks) as well as means of transportation. The Missouri River is also used as a water source for residents in states all along its borders and for irrigation.

If you want to convert various units of measure click here

2. Mississippi River

The Mississippi River is the United States’ second-longest river. Its length is about 3,544 km. When merged with Missouri, it creates the world’s fourth longest river system. Mississippi River runs through the state of Mississippi, also the states of Minnesota, Wisconsin, Iowa, Illinois, Missouri, Tennessee, and Louisiana. The mouth of the river empties into the Gulf of Mexico. Lake Itasca, in Clearwater County Minnesota, is the main source of the river. The Mississippi River is nearly 18 kilometers across at its widest point, which makes it a truly large river. The river has been crucial throughout history as it contains roughly a quarter of all North American fish species. The Mississippi River also gave rise to both saw and flour milling.

3. Yukon River

The Yukon River is the third-longest river in the United States that measures 3,190 km. It starts in the province of British Columbia, Canada, and runs westward through the Yukon Territories, then it continues through the whole state of Alaska, thereby letting it be classified as a U.S. river. The Yukon River flows to the western shore of Alaska and empties into the Bering Sea. Throughout the northern regions of North America, this river was used by Native Americans and early settlers as a means of transportation and was also important for travel and hunting.

4. Rio Grande River

This is the 4th longest river in the U.S. The meaning of the name is – “big river” so, according to the name, it is no wonder that it is one of the largest rivers in the United States. Headwaters of the river are found in the Colorado Rockies, in the San Juan Range, from there it flows through New Mexico and creates the border between Texas and Mexico. The Rio Grande river empties into the Gulf of Mexico. At times, there are sections where the river runs dry because it flows through the desert and drought-prone land. As a matter of fact, in 2001 and 2002, the river did not reach the Gulf and dried out fully before it could flow the entire length of its course. Yet, the river’s primary and continued path measures about 2,830 km.

Convert Liters to Ounces here

5. Colorado River

The Colorado River is the fifth-longest river in the US and it measures 2,330 km. Headwaters of the river is found in the Rocky Mountain National Park, and their mouth in the Gulf of California. The river flows through many famous lakes and valleys, from Lake Powell to the Grand Canyon, Hoover Dam, and Lake Mead. Running the line between both Arizona and Nevada, and then Arizona and California it forms a border between states. For major cities such as Los Angeles, Las Vegas, San Diego, Phoenix, and Tucson the Colorado River is a primary source of water. The majority of mentioned cities have aqueducts that run water from the river system.

6. Arkansas River

The 6th longest river is the Arkansas River, which flows mostly through Arkansas. The Arkansas River also commences in the Colorado mountains and flows eastward through Kansas, part of Oklahoma, and into Arkansas. Altogether, the river covers a distance of about 2,322 km. The Mississippi River is in fact the mouth of the Arkansas River, and it is assumed to be a tributary of the Mississippi-Missouri.

7. Columbia River

One of the longest rivers in the United States is the Columbia River. Its approximate length is 2,000 km. This river has a huge volume. In North America, this river is the second-largest. The most volume flows to the Pacific Ocean. This volume is used to power half of all the hydroelectricity in the US, through 11 different dams of the US.

8. Red River

This river has a length of about 1,811 km. Atchafalaya River is the mouth of the Red River. From there it runs through Texas, Oklahoma, Arkansas, and Louisiana. The Red River is special for two reasons: 1) it gets its red name due to the presence of silt and sand-like debris in the river that is formed by a rust-colored sedimentary rock. 2) it is very saline, meaning it is saltwater, not freshwater. An increase in its overall salinity is caused by salt deposits from what was likely a former ancient sea seeping into the tributaries which flow into the Red River.

Convert Cubic Yards to Cubic Feet here

Most of us, when furnishing our living spaces, want a home that reflects our personality, and is comfortable and stylish. That is the reason why we want to discuss here the advantages of wooden furniture. As you are already aware, when it comes to furniture there is a massive choice, including rattan, stainless steel, veneered chipboard or plywood, and glass, no doubt that natural wood is a great option; but what reasons can we put forward for making such an assertion? Of course, it is possible to make a good case for other materials as well. Let us look at the major reasons for preferring wood for our furniture.

Convert Cubic Yards to Cubic Feet here

Durability

Two types of woods exist softwood and hardwood. Softwoods include cedar and pine and are basically of a lighter color, when exposed to light it becomes darker and richer in tone. While softwoods are at risk of marking and scratches, this can add to the character of the piece of furniture and can give an organic warmth to your décor.

Hardwoods include rosewood, oak, cherry, mahogany, and teak. Hardwood trees tend to be more expensive because they grow slowly. It is very hardwearing. It keeps its rich appearance indefinitely. Hardwood is also usually darker. Furniture constructed from these woods is incredibly durable and last for many generations.

Appearance

Each element of wood furniture is exceptional; Because of the grain of the wood when you purchase a dining set the table and chairs will all have their own charm. Although all are cut in the same direction, there will be slight contrasts. As a tabletop, beautifully grained wood, like oak, will look gorgeous. Oak comes in red and white varieties; red, as the name suggests, has a reddish tinge and white is greyish brown.

Sustainability

Be certain to buy furniture that is made of sustainable wood. It means that trees are planted to replace those that have been cut down. It is necessary because some woods like mahogany, have become threatened by over-harvesting. With wood, you can choose an ecologically proper method of furnishing your home or office but with other materials, you don’t usually have an option.

Easy maintenance

It is easy to care for Wood. Systematic dusting with a soft cloth [old tee shirts are perfect] will keep it looking great. You can also purchase treated clothes for your wooden furniture. Polished finish wood benefits from natural wax polish in preference to silicone sprays. It is best not to clean, especially untreated wood with water. The reason is that it is very absorbent. Yet, for sticky spills, a soft cloth submerged in detergent diluted with water may be used. Mop it off fast and then dry thoroughly. Iron furniture, on the other hand, over a period of time is prone to rusting even if it has been painted.

Check out various useful conversions here

Suitable For All Areas In The Home

Probably your living area will have a TV stand, bookshelves, display cabinets, a fire surround [whether your fire is solid fuel, electric, or gas], and many other things. Your bedroom will definitely have a bed, and perhaps a wardrobe and dressing table, while your bathroom may have a small or large cabinet for toiletries or towels. There are some outstanding pieces of wooden furniture even for your backyard and patio. Actually, there are many DIY projects on how to assemble a picnic table for your backyard.

Versatility

There will always be wooden furniture to harmonize, whether your home is traditional, eclectic, modern, or has a rustic theme. Many people love a traditional dining room with a period-style table and chairs matched with the accessories. Cherrywood with a sideboard is ideal for this. Mentioned hardwood deepens in color as it ages. Pine gives a rustic feel to a modern kitchen, while it looks great in ash. Having a really eclectic bedroom with all your favorite things around you is really fun, you can mix and match wooden furniture of your choice and mix and match styles.

Great For The Outdoors

Nothing is quite like spending lazy days in your own garden in Summer. Garden furniture has become very popular over the last few decades and is available in all materials. Metal, plastic, and rattan are all favorites, but nothing can beat wood for strength and beauty.

Strength

Wood was one of the few things available for the manufacture of domestic furniture throughout the centuries. Eventually, other materials became available as well. The industrial revolution brought steel and iron, while plastics were produced in the 20th century. Naturally, people were willing to embrace what was assumed to progress. Nevertheless, it was not too long before the beauty and strength of wood were appreciated again, and nowadays, the assortment of woods makes it the material of preference for millions. For instance, people install teakwood floors, because teakwood is termite resistant.

Choice

Wood cannot be beaten for strength and appearance. It lends itself to both modern and traditional designs. From Arne Jacobsen to Thomas Chippendale furniture designers have been inspired by wood. They have carved it, engraved it, and bent it, enriching the world with their excellent and inspiring designs.

Use our converter for free

Good Value

When you purchase wooden furniture, no matter what you choose to spend you are getting a good deal. Nothing can touch the strength and beauty of natural wood. It has richness and an inner glow that delights the eye. There are many shops that offer only wooden furniture and have lots of discounts as well.

The abovementioned factors demonstrate the advantages of wooden furniture. Nothing can be better than beautiful natural wooden furniture.

Finding out your, or your loved one’s ring size is easier than you assume! There are plenty of DIY tricks and tools that you can use.

How To Measure Ring Size at Home?

There are a couple of methods that you can use to find out how to measure her ring size at home.

– Wrap a length of dental floss or string around your finger, and mark where the end meets

– Wrap a thin part of paper around your finger, and mark where the end meets

– Get another ring you have and measure it with the jewels mandril

– Wrap a tape measure around your finger and write down the length

Check out the liter to oz converter here

How To Measure Ring Size In mm and cm?

If you’re measuring in millimeters (mm) and you need to convert mm to inches, use this simple formula: 1 inch = 25.4 mm. If you want to measure in centimeters (cm), then simply divide the value in mm by 10.

Measuring Ring Size With A Ruler

Using a ruler to measure your ring size isn’t the most useful, but it’s not impossible. Measuring ring size with a ruler includes selecting a starting point on your finger as point 0. Next swivel the ruler around your finger, never let the ruler move away from your skin. Once you have spun the ruler fully around your finger back to point 0, you will have your measurement.

Measure Ring Size With String

Using a string is one of the more easy techniques. Grab the string and wrap it around your finger just where the ring is going to lay. Straighten out the string and put it next to a ruler. If you’re using inches, refer to the conversion formula mentioned above.

How To Know Ring Size With Tape Measure?

This kind of measure is relatively similar to the string method but omits the step of having to measure. Tape measures are much thicker than string, so you will have to be very attentive towards placement when measuring. The point in both is not to be too loose or too tight. The string must be firmly against your skin, but not digging into it. This creates the comfiest size.

Measuring Ring Size From A Ring Without Her Knowing

If you are wondering how to measure ring size from a ring, there are two unfailing ways to get her ring size without her knowing. In both matters, take note of a ring she loves to wear that appears to fit comfortably. When she takes it off, take a bar of soap [even playdough if it’s more suitable] and press the ring into it to make a mold. If you don’t have that much time, option B is to put it onto your pinky finger and make a mark where it fits.

Measuring Ring Size for A Silicone Ring

You can use the same methods and measurements. Yet, compared to a typical metal ring, silicone acts differently. There’s a little bit more flexibility, and the material slightly stretches. It’s best, particularly if you are in between sizes, to air on the smaller size to take advantage of silicon’s flexing and stretching nature.

Convert cm to inches here

How To Measure Man’s Ring Size?

Measuring way to a man’s ring size doesn’t differ from measuring a woman’s finger. The one difference is that men’s rings are usually a little broader and a little thicker. The dimensions of the ring make it feel tighter, so moving a half-size-up is usually needed for comfort maximization.

How To Do Ring Size Without Taking Measurements?

If you are organizing a wedding and purchasing a ring for someone as a surprise and all else fails, hold her hand, make a mental note about her finger size (how thick is her finger) in your hand, and try to find something around the house that is roughly the same size so that the jeweler has a reference point. If you are trying to guess, it is always better to go with a larger size. This is much easier to resize a larger ring than a ring that is too small.

Whether you are measuring your finger or picking an engagement ring for a stunner proposal, the point of taking a measurement is so that the ring feels as comfortable on the finger as possible.

When taking your measurements, it is best to bear in mind how much fingers can change. When they are warm they become thicker  – so the time of day and seasons play a role, and the ring also has to get past the knuckle which is usually wider than where they sit.

In order to get the best results, measure your finger at the end of the day and leave a little space for the knuckle.

Find out urban style jewelry here